Dryer Vents and Fire Safety


As clothing tumbles dry airborne water vapors get forced out of the dryer vent to the exterior of the home. Most clothing dryers have a gas burner or are operated by electricity. Both types of dryers push warm air against the tumbling clothes. This tumbling and hot air circulation evaporates the water that is left in the load of laundry.

The clothes dryer exhaust that ejects the moist hot air can be an area of concern if it is not properly secured, connected or maintained. The metal dryer discharge pipe should be firmly connected to the housing that extends to the exterior of the home. If it is not properly connected hot steam and moisture can cause damage inside the home in the form of mold and wood rot damages.

The dryer discharge should not be obstructed. A clogged or obstructed dryer discharger can be a fire hazard. Often the flexible dryer pipe is kinked or bent. The pipe must remain in good condition to properly exhaust the clothes dryer. Rigid vent piping is much more preferable then flexible dryer vent. Flexible dryer venting pipes have ridges which cause friction inside the pipe. Friction can cause lint to build up which is a fire hazard. Opt for the rigid dryer vent pipe, the pipe is usually aluminum and very easy to piece together (screws are not allowed) clean dryer duct.

Lint build up is the major cause of dryer fires in the United states. Lint is very flammable and should not be left to build up inside the dryer vent discharge pipe. However most dryer fires are caused by the dryer overheating caused by excess heat that occurs with an obstructed venting pipe. As the vent pipe becomes more constricted heat builds up in the dryer motor which can lead to mechanical failure and sparking. The lint that is obstructing the dryer vent pipe and the excess lint that can not leave the dryer can ignite.

According to recent data dryer fires are more common then most people realize. There are over 15000 dryer fires in the United states each year according to the National Fire Protection Agency.

Some quick tips to avoid dryer fires:

– Use ridged dryer ventilation pipe
– Avoid flexible dryer venting pipes
– Limit the length of the dryer discharge pipe to under twenty feet.
– Limit the number of elbow connections to not more then two (in 20 foot run)
– Vent the dryer to the exterior and not under a deck, porch, window well or interior space
– Do not install a screen at the dryer vent exhaust end

Dryer Vent Cleaning – A Few Important Tips

Dryer vent cleansing MD is quite important since fires which can be caused because of dirty and clogged vents is that the primary cause for residential fires in US today. Since these dryers aren’t in sight, many homeowners often tend to neglect them the maximum. A good new lint trap in the dryer will only be able to eliminate 80% lint which means that there would be a significant amount of lint in the vents inside a single year. Lint is very caustic plus it may bring about fires in home which can disperse throughout your house in virtually no time at all. With excessive lint, the vents would be blocked and also the atmosphere that is forced through the vents are confined which would make your dryer over-heat plus it would lower its efficacy together with the time.

A Few Important Guidelines

* To dryer port cleaning MD, make sure there are no rips from the lint trap. Wash it effectively every time before you load on the garments. In case the dust remains wet in the trap, then then you need to receive your vents cleaned professionally. The monitor should also be cleaned per week dryer duct.

* Check that the exterior hood of this port once the drier is in functioning. If the flaps are moving along with if you are able to feel the airflow afterward the vents are working fine. If not, you then need to get it inspected.

* Check across the dryer to determine whether there is any lint on the floor which is a indication that the exhaust system should really be cleaned.

* If the clothes take more than ordinary to wash, then your drier wouldn’t be doing work efficiently and could need to be washed.

* Don’t dry rags or clothes that have been saturated in liquid fluid.

A Few Tips

For drier vent cleansing MD, then you need to think about setting up a normal appointment with your local cleaning firm in Maryland ahead and inspect your vents. You can even wash the vents in home when you have the correct equipment and tools to the occupation like rods and brushes which are connected to high power drill. But most property owners do have no experience on this is the reason it’s necessary to seek aid of the expert cleaning firm. There may be a few matters that may be inappropriate with the vents such as vents that have overly many springs, loose or disconnected vents, the incorrect form of vent etc.. A excellent company could have enough knowledge and the perfect resources to take care of one or more of these situations properly.


You can find various types of repairs which you could need to go done from time to time. Some of the repairs that you just could want may consist of changing or rerunning the port exhaust ducts, changing or including port hood, or cleaning the duct exits, or fixing a port. In order to stop fires at home, it is important to get the drier vents at residence cleaned at least once per yr. Dryer vent cleaning MD ought to be an important part of your house routine maintenance.